Softing CableMaster 500 Cable tester and fault locator - 226512

CableMaster 500 - Cable tester and fault locator - 226512

The CableMaster 500 is designed to test and measure lengths of all common low voltage cabling found in today’s network, video or telephone systems. It also maps the locations of cable ends by sending a tone on the cable that can be traced with a tone tracer or by blinking the LED on the port jack. The CableMaster 500 has a large, bright backlit LCD display and glow-in-the-dark buttons to directly access each function. The remote stores inside the main unit for ease of cable testing.

Features

• Detects Open, Shorts, Miswires, Reverses & Split Pairs
• Tests to T568A/B wiremap configuration: shorts, opens, miswires, reverses and split pairs
• Single-ended Testing for Shorts & Split Pairs
• Measures Length in Feet/Meters
• Identifies cable location on active ports using flashing Port Link Light
• Easy to read, backlit LCD screen with large icons, glow-in-thedark keypad and built-in LED flashlight foruse in dark areas
• Verifies continuity for multiple cable types (LAN, Phone and Video)
• Audible beep for additional feedback
• Identify up to 20 network or coax cable runs at a time
• Measures cable length, distance to opens and breaks specific wires, pairs or all wires simultaneously
• Master remote stored in main unit
• Voltage detection warning icon
• Continuous loop test mode for trouble shooting
• Auto-off and timed backlight in any mode for low power consumption and long battery life
• Audible Tone Generator, 4 selectable cadences

Specifications

Display : Large 2.75" Backlit Monochrome LCD

Dimensions : 6.8 x 3.2 x 1.4 inch (17.3 x 8.1 x 3.5cm)

Weight : 10.8 oz. (305 grams) with battery and remote

Operating Temperature : 0 ̊C/32 ̊F to 50 ̊C/122 ̊F

Storage Temperature : -20 ̊/-4 ̊F to 60 ̊C/140 ̊F

Humidity : 10% to 90%, non-condensing

Maximum Voltage between any two connector pins without damage : RJ12/RJ45/F: 50V DC or AC

Battery Life : 9V alkaline battery typical / Standby: 4 years / Active: 425 hours

Cable Types : Shielded or Unshielded; CAT7, CAT6A, CAT5e, CAT5, CAT4, CAT3, Coax

Maximum RJ Cable Length Testing : 0 to 1,000 feet (305 meters)

Minimum Cable Length for Split Pair Detection : 1.5 feet (0.5 meters)

Maximum Coax Cable Length : Varies depending on cable resistance varies

Low Battery : Icon flashes when battery voltage falls below 6V

Measurement Technology : Capacitance testing

Length Accuracy without Length Constant : ± 3% plus + 1 foot

Default Length Constant (Restoredwith power on reset) : Voice (Twisted pair): 17.4pF/ft / Video (Coax): 16.5pF/ft / Data (Twisted pair): 15pF/ft

Warranty : Limited 1 year

Article Number : 226512

CableMaster 500 Contains :

• 1 CableMaster 500
• 1 9V Battery
• 1 Manual