MultiOne GSM Cloud - 1 input and 1 relay output GSM remote controller

GSM gate controller and communicator

• 1 input optocoupler (voltage)
• 1 relay output 230VAC / 24VDC, NO/NC
• Output control monostable (65535 sec.) or bistable
• Power supply: 16-24 VAC or 10-30 VDC
• SMS sent to a predefined user phone number
• Output control by phone numbers that are saved on the SIM card (250/500), or controlled without caller ID (unlimited) or unlimited user via Cloud Manager application (Android and iOS)
• Programming by DIP switches and SMS
• Cloud connection for remote access and application use

How can you save time with the installation of the MultiOne GSM Cloud?

The MultiOne GSM Cloud provides Plug & Play installation possibility. Hence, the device is ready to use without programming.

How many phone numbers can control the output for free?

The module has a relayed output that can be controlled with a free voice call using caller identification. Control phone numbers (250/500) are stored on the SIM card which is inserted into the module. By using this function, only those phone numbers can open the gate which is stored on the SIM card. Without caller identification, the module can be controlled from any telephone number. Therefore, the MultiOne is a GSM gate controller that can open the gate by any incoming calls.

Thanks to Cloud communication you can control the MultiOne GSM Cloud via the Cloud Manager application (Android and iOS too) with unlimited users. In the application, you can get also information about the input and the status of the module.

 Why is the MultiOne GSM Cloud a reliable and multi-purpose GSM remote controller?

Due to the output relay, which maximum load is 5A and 230 VAC /24 VDC, even lights, air conditioners, and garage doors can be controlled remotely. Output can operate in monostable or in bistable mode; when in monostable mode maximum control time is 250 seconds. Output type can be normally closed or normally open.

How can you monitor devices with SMS transmission possibility?

The GSM communicator can send an SMS to a previously stored phone number about its input change. Howbeit, the module can forward an SMS about the alarm center’s arming. For security reasons, the module is equipped with an optocoupler voltage input. Voltage arriving at the input can be between 5-30 V.

What makes the MultiOne GSM Cloud an easily programmable GSM device?

Basic module settings are adjustable with the DIP switches, including caller identification, as well as the output type. Telephone numbers for SMS sending and output control duration in monostable mode can be set with SMS commands. In the Cloud, you can check the event list, manage the users and set up the PUSH and also the e-mail notification messages. 

Application Areas

• GSM gate controller
• GSM barrier controller
• Home automation (air conditioner, heating system, sauna, lighting)