• Your shopping cart is empty!

TELTONIKA Industrial M2M Gateway - TRB255
TELTONIKA Industrial M2M Gateway - TRB255  TELTONIKA Industrial M2M Gateway - TRB255  TELTONIKA Industrial M2M Gateway - TRB255 

TELTONIKA Industrial M2M Gateway - TRB255

  • Brand: TELTONIKA
  • Product Code: TRB255
  • Availability: In Stock


Industrial all-in-one M2M LTE Cat-M1/NB-IoT/EGPRS gateway, equipped with multiple inputs/outputs, RS232, RS485, and Ethernet interfaces to be used universally in various M2M applications.

Features

  • Connectivity : 4G/LTE (Cat M1), NB-IoT, 2G
  • Dual Sim : With auto failover, backup WAN and other switching scenarios
  • Serial Ports : RS232/RS485 serial communication interfaces
  • I/O : Multiple Inputs and Outputs for remote monitoring and control

Specifications

Mobile

  • Mobile module : LTE (Cat M1) / NB-IoT / EGPRS

  • SIM switch : 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection

  • Status : Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID

  • SMS : SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP

  • USSD : Supports sending and reading Unstructured Supplementary Service Data messages

  • Black/White list : Operator black/white list

  • Multiple PDN : Possibility to use different PDNs for multiple network access and services

  • Band management : Band lock, Used band status display

  • APN : Auto APN

  • Bridge : Direct connection (bridge) between mobile ISP and device on LAN

  • Passthrough : Router assigns its mobile WAN IP address to another device on LAN

Ethernet

  • LAN : 1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

Network

  • Routing : Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP)

  • Network protocols : TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)

  • VoIP passthrough support : H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

  • Connection monitoring : Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

  • Firewall : Port forward, traffic rules, custom rules

  • DHCP : Static and dynamic IP allocation, DHCP Relay, Relayd

  • QoS / Smart Queue Management (SQM) : Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

  • DDNS : Supported >25 service providers, others can be configured manually

  • Network backup : Mobile, VRRP, Wired options, each of which can be used as an automatic Failover

  • Load balancing : Balance Internet traffic over multiple WAN connections

  • SSHFS : Possibility to mount remote file system via SSH protocol

Security

  • Authentication : Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block

  • Firewall : Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

  • Attack prevention : DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

  • VLAN : Port and tag based VLAN separation

  • Mobile quota control : Custom data limits for both SIM cards

  • WEB filter : Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

  • Access control : Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

  • OpenVPN : Multiple clients and a server can run simultaneously, 27 encryption methods

  • OpenVPN Encryption : DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128,  AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192,  AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256

  • IPsec : IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)

  • GRE : GRE tunnel, GRE tunnel over IPsec support

  • PPTP, L2TP : Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support

  • Stunnel : Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

  • DMVPN : Method of building scalable IPsec VPNs

  • SSTP : SSTP client instance support

  • ZeroTier : ZeroTier VPN client support

  • WireGuard : WireGuard VPN client and server support

  • Tinc : Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.

MODBUS TCP SLAVE

  • ID range : Respond to one ID in range [1;255] or any

  • Allow Remote Access : Allow access through WAN

  • Custom registers : MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality

MODBUS TCP MASTER

  • Supported functions : 01, 02, 03, 04, 05, 06, 15, 16

  • Supported data formats : 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

  • Supported baud rates : From 300 - 3000000

MODBUS RTU MASTER (RS232)

  • Supported functions : 01, 02, 03, 04, 05, 06, 15, 16

  • Supported data formats : 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

  • Number of data bits : From 7 to 8

  • Number of stop bits : 1 or 2

  • Parity : None, Even, Odd

  • Flow : None, RTS/CTS, Xon/Xoff

  • Duplex : Full duplex

MODBUS RTU MASTER (RS485)

  • Supported baud rates : From 300 to 300000

  • Supported functions : 01, 02, 03, 04, 05, 06, 15, 16

  • Supported data formats : 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

  • Number of data bits : 7 or 8

  • Number of stop bits : 1 or 2

  • Parity : None, Even, Odd

  • Flow : None, Xon/Xoff

  • Duplex : Half duplex

MODBUS DATA TO SERVER

  • Protocol : HTTP(S), MQTT, Azure MQTT

MQTT Gateway

  • MQTT Gateway : Allows sending commands and receiving data from MODBUS Master through MQTT broker

DNP3

  • Supported modes : TCP Master, DNP3 Outstation, RTU Master

Monitoring & Management

  • WEB UI : HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log

  • FOTA : Firmware update from server, automatic notification

  • SSH : SSH (v1, v2)

  • SMS : SMS status, SMS configuration, send/read SMS via HTTP POST/GET

  • Call : Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer

  • TR-069 : OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

  • MQTT : MQTT Broker, MQTT publisher

  • SNMP : SNMP (v1, v2, v3), SNMP Trap

  • JSON-RPC : Management API over HTTP/HTTPS

  • MODBUS : MODBUS TCP status/control

  • RMS : Teltonika Remote Management System (RMS)

IoT Platforms

  • Cloud of Things : Allows monitoring of: Device data, Mobile data, Network info, Availability

  • ThingWorx : Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type

  • Cumulocity : Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength

  • Azure IoT Hub : Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type

System Characteristics

  • CPU : Qualcomm QCA9531, MIPS 24kc, 650 MHz

  • RAM : 64 MB, DDR2

  • FLASH storage : 16 MB, SPI Flash

Firmware / Configuration

  • WEB UI : Update FW from file, check FW on server, configuration profiles, configuration backup

  • FOTA : Update FW

  • RMS : Update FW/configuration for multiple devices at once

  • Keep settings : Update FW without losing current configuration

Firmware Customization

  • Operating system : RutOS (OpenWrt based Linux OS)

  • Supported languages : Busybox shell, Lua, C, C++

  • Development tools : SDK package with build environment provided

Location Tracking

  • GNSS : GPS, GLONASS, BeiDou, Galileo and QZSS

  • Coordinates : GNSS coordinates via WebUI, SMS, TAVL, RMS

  • NMEA : NMEA 0183

  • NTRIP : NTRIP protocol (Networked Transport of RTCM via Internet Protocol)

  • Server software : Supported server software TAVL, RMS

  • Geofencing : Configurable multiple geofence zones

Serial

  • RS232 : Terminal block connector: TX, RX, RTS, CTS

  • RS485 : Terminal block connector: D+, D-, R+, R- (2 or 4 wire interface)

  • Serial functions : Console, Serial over IP, Modem, MODBUS gateway, NTRIP Client

Input / Output

  • Input : 3 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high. 1 x Analog input (0 - 30 V)

  • Output : 3 x Digital Output, Open collector output, max output 30 V, 300 mA

  • Events : Email, RMS, SMS

  • I/O juggler : Allows to set certain I/O conditions to initiate event

Power

  • Connector : 2 pins in 16-pin industrial terminal block

  • Input voltage range : 9 – 30 VDC, reverse polarity protection, surge protection +/-1 kV 50 µs max

  • Power consumption : Idle: < 1.2 W, Max: < 5 W

Physical Interfaces

  • Ethernet : 1 x RJ45 port, 10/100 Mbps

  • I/O’s : 3 x Configurable I/O, 1 x Analog input in 16 pin terminal block

  • Status LEDs : 3 x connection status LEDs, 3 x connection strength LEDs, 1 x power LED, 1 x Eth port status LED

  • SIM : 2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, double stacked SIM tray

  • Power : 1 x 16-pin terminal block

  • Antennas : 1 x SMA connector for LTE, 1 x SMA connector for GNSS

  • RS232 : 4 pins in 16-pin terminal block (TX, RX, RTS, CTS)

  • RS485 : 4 pins in 16-pin terminal block (D+, D-, R+, R-)

  • Reset : Reboot/User default reset/Factory reset button

Physical Specification

  • Casing material : Aluminum housing

  • Dimensions (W x H x D) : 110 x 50 x 100 mm

  • Weight : 165 g

  • Mounting options : DIN rail (can be mounted on two sides), flat surface placement

Operating Environment

  • Operating temperature : -40 °C to 75 °C

  • Operating humidity : 10% to 90% non-condensing

  • Ingress Protection Rating : IP30

Package contains

  • Gateway TRB255
  • 9 W PSU
  • 1 x Mobile antenna (swivel, SMA male)
  • 1 x GNSS antenna (adhesive, SMA male, 3 m cable)
  • 16 pin terminal block
  • 1 x hex key
  • Ethernet cable (1.5 m)
  • QSG (Quick start guide)
  • RMS Flyer
  • Packaging box

Tags: Industrial M2M Gateway - TRB255,