TELTONIKA Industrial Ethernet Router - RUT300

Rugged industrial fast Ethernet router comes with the benefits of RutOS, advanced security features, and a possibility to connect to the RMS. Five fast Ethernet ports, two configurable digital inputs/outputs, and a USB 2.0 allow to easily connect industrial machinery, office or retail equipment, and other devices to the internet.

Features

• Interfaces : 5 x Fast Ethernet ports (10/100 Mbps). 2 x Configurable digital Inputs/Outputs and USB 2.0
• Durability : Aluminum housing, which is capable to withstand harsh environments
• VPN : Numerous VPN services including OpenVPN, IPsec, PPTP, L2TP & DMVPN, L2TP, DMVPN, Stunnel and others
• RMS : For remote management, access & VPN services

Specifications

Ethernet

• WAN : 1 x WAN port  10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

• LAN : 4 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover

Network

• Routing : Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP)

• Network protocols : TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)

• VoIP passthrough support : H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

• Connection monitoring : Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

• Firewall : Port forward, traffic rules, custom rules

• DHCP : Static and dynamic IP allocation, DHCP Relay, Relayd

• QoS / Smart Queue Management (SQM) : Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

• DDNS : Supported >25 service providers, others can be configured manually

• Network backup : VRRP, Wired options, each of which can be used as an automatic Failover

• Load balancing : Balance Internet traffic over multiple WAN connections

• SSHFS : Possibility to mount remote file system via SSH protocol

Security

• Authentication : Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block

• Firewall : Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

• Attack prevention : DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

• VLAN : Port and tag based VLAN separation

• WEB filter : Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

• Access control : Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

• OpenVPN : Multiple clients and a server can run simultaneously, 27 encryption methods

• OpenVPN Encryption : DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256

• IPsec : IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)

• GRE : GRE tunnel, GRE tunnel over IPsec support

• PPTP, L2TP : Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support

• Stunnel : Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

• DMVPN : Method of building scalable IPsec VPNs

• SSTP : SSTP client instance support

• ZeroTier : ZeroTier VPN client support

• WireGuard : WireGuard VPN client and server support

• Tinc : Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.

MODBUS TCP SLAVE

• ID range : Respond to one ID in range [1;255] or any

• Allow Remote Access : Allow access through WAN

• Custom registers : MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend / MODBUS TCP Slave functionality

MODBUS TCP MASTER

• Supported functions : 01, 02, 03, 04, 05, 06, 15, 16

• Supported data formats : 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

MODBUS DATA TO SERVER

• Protocol : HTTP(S), MQTT, Azure MQTT

MQTT Gateway

• MQTT Gateway : Allows sending commands and receiving data from MODBUS Master through MQTT broker

DNP3

• Supported modes : TCP Master, DNP3 Outstation

Monitoring & Management

• WEB UI : HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log

• FOTA : Firmware update from server, automatic notification

• SSH : SSH (v1, v2)

• TR-069 : OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

• MQTT : MQTT Broker, MQTT publisher

• SNMP : SNMP (v1, v2, v3), SNMP Trap

• JSON-RPC : Management API over HTTP/HTTPS

• MODBUS : MODBUS TCP status/control

• RMS : Teltonika Remote Management System (RMS)

IoT Platforms

• Cloud of Things : Allows monitoring of: Device data, Mobile data, Network info, Availability

• ThingWorx : Allows monitoring of: WAN Type, WAN IP

• Cumulocity : Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP

• Azure IoT Hub : Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server

System Characteristics

• CPU : QCA9531, MIPS 24kc, 650 MHz

• RAM : 64 MB, DDR2

• FLASH storage : 16 MB, SPI Flash

Firmware / Configuration

• WEB UI : Update FW from file, check FW on server, configuration profiles, configuration backup

• FOTA : Update FW

• RMS : Update FW/configuration for multiple devices at once

• Keep settings : Update FW without losing current configuration

Firmware Customization

• Operating system : RutOS (OpenWrt based Linux OS)

• Supported languages : Busybox shell, Lua, C, C++

• Development tools : SDK package with build environment provided

USB

• Data rate : USB 2.0

• Applications : Samba share, USB-to-serial

• External devices : Possibility to connect external HDD, flash drive, additional modem, printer

• Storage formats : FAT, FAT32, NTFS

Input / Output

• Input : 2 x Configurable digital Inputs. Digital input 0 - 5 V detected as logic low, 8 - 30 V detected as logic high.

• Output : 2 x Configurable digital Outputs. Open collector output, max output 30 V, 300 mA.

• Events : Email, RMS

• I/O juggler : Allows to set certain I/O conditions to initiate event

Power

• Connector : 4-pin industrial DC power socket

• Input voltage range : 7 - 30 VDC, reverse polarity protection, voltage surge/transient protection

• PoE (passive) : Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, LAN1 Port, 9 - 50 VDC

• Power consumption : Idle: 1.3 W, Max: 3 W

Physical Interfaces

• Ethernet : 5 x RJ45 ports, 10/100 Mbps

• I/O’s : 2 x Configurable I/O pins on 4-pin power connector

• Status LEDs : 5 x ETH status, 1 x Power

• Power : 1 x 4-pin power connector

• USB : 1 x USB A port for external devices

• Reset : Reboot/User default reset/Factory reset button

Physical Specification

• Casing material : Aluminium housing with DIN rail mounting option

• Dimensions (W x H x D) : 100 x 30 x 85 mm

• Weight : 229 g

• Mounting options : DIN rail, flat surface placement
   

Operating Environment

• Operating temperature : -40 °C to 75 °C

• Operating humidity : 10% to 90% non-condensing

• Ingress Protection Rating : IP30

Package contains

• Router RUT300
• 9 W PSU
• Ethernet cable (1.5 m)
• QSG (Quick Start Guide)
• RMS Flyer
• Packaging box